Drive Z-80 8SPEED, (1/2 x 3/32 ) 126 LINKS, STEEL Mountain Bike / Road Bike Chain (FOR MULTIPLE SPEED GEAR BIKES)

Bicycle Chains For Mountain Bikes / Road Bikes

Brand: Drive

Model: Z-80

Net weight: 350grams

Color: Chrome Plated

A. CLOSING

• Please  pull the ends of the chain together and install both halves of the QRs Link into the chain ends.
• Press Both halves of the QRs Link is. Slide the chain ends together and lock in place by pulling the chain opposite direction.

B. RELEASING

• Fing out where your QRs is. Slide the chain ends together.
• Then, you are able to remove the two halves of the link from the chain ends.

C. REUSABLE

• QRs Link is reusable; however, we suggest you use a new QRs Link when you Change a new chain.

INSTRUCTIONS:

1. Only use the correct chain tool for fitting the pin.
2. Never try to re-insert a pin and measure the chain carefully before initial fitting.
3. Always use a new connecting link, when renewing chain.
4. If in doubt consult a specialist cycle dealer.
5. Links must be removed fron the outer links not the inner links.
6. Check the holes in the plates once the pin has been pushed out for any sign of a burr. If you see a burr, remove carefully using a small flat edged screwdrive.
7. Once you are sure you have the correct length insert the connecting link and snap firmly into place.